@article{Jin2026,author={Jin, W. and Deen, N.G. and Remmers, J.J.C. and Finotello, G.},year={2026},month=mar,pages={111739},title={Droplet formation in ultrasonic atomization: Influence of film thickness, amplitude and liquid properties},volume={175},journal={Experimental Thermal and Fluid Science},doi={10.1016/j.expthermflusci.2026.111739},}
A Fast Hessian-Free Finite Element Ray Tracing Method for Light Transport in Gradient-Index Media
@article{Aarab2026,author={Aarab, M. and Geers, M.G.D. and Remmers, J.J.C.},title={A Fast Hessian-Free Finite Element Ray Tracing Method for Light Transport in Gradient-Index Media},journal={Optics Express},year={2026},doi={DOI:10.1364/OE.582633},}
2025
Volume-of-Fluid simulations of multiphase flows with high surface tension and curvature using a tensile force method with pressure jump correction
D.P.L. Thuy-Petrov, N.G. Deen, J.J.C. Remmers, and G. Finotello
International Journal of Multiphase Flow, Mar 2025
Accurate modeling of surface tension forces in Computational Fluid Dynamics (CFD) simulations of multiphase flow is crucial for applications such as droplet formation and jet breakup, especially for interfaces with high surface tension and curvature. This work integrates a Tensile Force (TF) method in a geometric Volume-of-Fluid (VOF) solver. Unlike the Continuum Surface Force (CSF) model, the TF method calculates the surface tension force directly at the interface location, thus reducing the smearing of the force around the interface. Combination with a Pressure Jump Correction (PJC) further reduces the magnitude of the forces at the interface. This lowers the intensity of problematic spurious currents and allows the simulation of multiphase flows with high surface tension and curvature, which is typically challenging for the CSF method. We validate the TF method through several simulation test cases. Results show that the TF method reduces spurious velocities by an order of magnitude compared to the CSF model. The TF accurately models capillary instability in cases where the CSF model fails. Additionally, the TF model is combined with Adaptive Mesh Refinement (AMR) and Large Eddy Simulation (LES) to simulate droplet breakup. Typical features of the bag-breakup regime are successfully reproduced. Diameters and velocities of secondary droplets are predicted with reasonable agreement to experimental data. Simulation of primary breakup of a liquid aluminium jet in the gas atomization process demonstrates the TF model in industrially relevant conditions.
@article{thuy2025,title={Volume-of-Fluid simulations of multiphase flows with high surface tension and curvature using a tensile force method with pressure jump correction},journal={International Journal of Multiphase Flow},pages={105535},year={2025},issn={0301-9322},doi={https://doi.org/10.1016/j.ijmultiphaseflow.2025.105535},author={Thuy-Petrov, D.P.L. and Deen, N.G. and Remmers, J.J.C. and Finotello, G.},keywords={Computational fluid dynamics (CFD), Multiphase flow, Volume-of-Fluid (VOF), Surface tension modeling, Tensile force method (TF), Large Eddy Simulation (LES)}}
Solid-shell element for modeling consolidation-induced wrinkle defect formation
@inproceedings{hodzelmans2025,author={Hodzelmans, M.M. and Hallett, S.R. and Remmers, J.J.C. and Belnoue, J.P.H.},title={Solid-shell element for modeling consolidation-induced wrinkle defect formation},booktitle={Material Forming - ESAFORM 2025 Materials Research Forum LLC},series={Materials Research Proceeding},volume={54},year={2025},pages={1935-1944},doi={10.21741/9781644903599-208},}
An efficient physics-based model order reduction for geometrically nonlinear solid mechanics
@article{Babbepalli2025,author={Babbepalli, P.R. and Remmers, J.J.C. and {van der Sluis}, O.},title={An efficient physics-based model order reduction for geometrically nonlinear solid mechanics},journal={Finite Elements in Analysis and Design},pages={104351},year={2025},volume={248},doi={10.1016/j.finel.2025.104351}}
High-resolution additive manufacturing for 3D multifunctional microelectronic devices
@inproceedings{sol2025high,author={Sol, J.H.P. and Aarab, M. and {van Grondelle}, W. and Walsh, D.R. and S.C.E., Suijdendorp and Remmers, J.J.C. and Akkerman, H.B.},title={High-resolution additive manufacturing for 3D multifunctional microelectronic devices},booktitle={Emerging Digital Micromirror Device Based Systems and Applications XVII},volume={13383},pages={1338302},year={2025},publisher={SPIE},doi={10.1117/12.3040844}}
A mean-field homogenization model for fiber reinforced composite materials in large deformation with plasticity
@article{Li2025,author={Li, A. and Remmers, J.J.C. and {van Dommelen}, J.A.W. and Massart, T.J. and Geers, M.G.D.},title={A mean-field homogenization model for fiber reinforced composite materials in large deformation with plasticity},journal={International Journal of Solids and Structures},pages={113200},year={2025},doi={10.1016/j.ijsolstr.2024.113200}}
2024
Towards a real-time simulation of elastoplastic deformation using multi-task neural networks
@article{Schmeitz2024,author={Schmeitz, R. and Remmers, J.J.C. and Mula, O. and {van der Sluis}, O.},title={Towards a real-time simulation of elastoplastic deformation using multi-task neural networks},journal={Advanced Modeling and Simulation in Engineering Sciences},volume={11},pages={24},year={2024},doi={10.1186/s40323-024-00278-y}}
Meso-scale modelling of complex fibre composite geometries using an immersed boundary method
@article{Borjesson2024,author={B{\"o}rjesson, E. and Verhoosel, C.V. and Remmers, J.J.C. and Fagerstr{\"o}m, M.},title={Meso-scale modelling of complex fibre composite geometries using an immersed boundary method},journal={Finite Elements in Analysis and Design},volume={242},pages={104262},year={2024},doi={10.1016/j.finel.2024.104262}}
AI chatbots in programming education: Students’ use in a scientific computing course and consequences for learning
@article{Groothuijsen2024,author={Groothuijsen, S. and {van den Beemt}, A. and Remmers, J.J.C. and {van Meeuwen}, L.W.},title={AI chatbots in programming education: Students’ use in a scientific computing course and consequences for learning},journal={Computers and Education: Artificial Intelligence},volume={7},pages={100290},year={2024},doi={10.1016/j.caeai.2024.100290}}
A periodic micromechanical model for the rate-and temperature-dependent behavior of unidirectional carbon fiber-reinforced PVDF
@article{Lenders2024,author={Lenders, T. and Remmers, J.J.C. and Pini, T. and Veenstra, P. and Govaert, L.E. and Geers, M.G.D.},title={A periodic micromechanical model for the rate-and temperature-dependent behavior of unidirectional carbon fiber-reinforced PVDF},journal={Journal of Reinforced Plastics and Composites},pages={07316844241266012},year={2024},doi={10.1177/07316844241266012}}
Development of optimal L-PBF process parameters using an accelerated discrete element simulation framework
@article{Aarab2024,author={Aarab, M. and Dorussen, B.J.A. and Poelsma, S.S. and Remmers, J.J.C.},title={Development of optimal L-PBF process parameters using an accelerated discrete element simulation framework},journal={Granular Matter},volume={26},number={3},pages={69},year={2024},doi={10.1007/s10035-024-01432-4}}
2023
An efficient ray tracing methodology for the numerical analysis of powder bed additive manufacturing processes
@article{Dorussen2023,author={Dorussen, B.J.A. and Geers, M.G.D. and Remmers, J.J.C.},title={An efficient ray tracing methodology for the numerical analysis of powder bed additive manufacturing processes},journal={Additive Manufacturing},volume={73},pages={103706},year={2023},doi={10.1016/j.addma.2023.103706}}
A consistent formulation for yarn re-orientation in shear and off-axis loading of woven composites RVEs
@article{Li2023,author={Li, A. and Remmers, J.J.C. and Geers, M.G.D. and Massart, T.J.},title={A consistent formulation for yarn re-orientation in shear and off-axis loading of woven composites RVEs},journal={Composite Structures},volume={324},pages={117472},year={2023},doi={10.1016/j.compstruct.2023.117472}}
Efficient modelling of ceramic sintering processes: Application to bilayers and membranes
@article{Shi2023,author={Shi, H. and Giuntini, D. and {van Dommelen}, H. and Geers, M.G.D. and Remmers, J.J.C.},title={Efficient modelling of ceramic sintering processes: Application to bilayers and membranes},journal={Journal of the European Ceramic Society},volume={43},number={11},pages={4939--4949},year={2023},doi={10.1016/j.jeurceramsoc.2023.03.053}}
@article{BorjessonHomog2023,author={B{\"o}rjesson, E. and Larsson, F. and Runesson, K. and Remmers, J.J.C. and Fagerstr{\"o}m, M.},title={Variationally consistent homogenisation of plates},journal={Computer Methods in Applied Mechanics and Engineering},volume={413},pages={116094},year={2023},doi={10.1016/j.cma.2023.116094}}
An elasto-viscoplastic constitutive model for the rate-dependent behavior of polyvinylidene fluoride
@article{LendersPolymer2023,author={Lenders, T. and Remmers, J.J.C. and Pini, T. and Veenstra, P. and Govaert, L.E. and Geers, M.G.D.},title={An elasto-viscoplastic constitutive model for the rate-dependent behavior of polyvinylidene fluoride},journal={Journal of Polymer Science},year={2023},doi={10.1002/pol.20220729}}
A wavelet-enhanced adaptive hierarchical FFT-based approach for the efficient solution of microscale boundary value problems
@article{Kaiser2023,author={Kaiser, T. and Raasch, T. and Remmers, J.J.C. and Geers, M.G.D.},title={A wavelet-enhanced adaptive hierarchical FFT-based approach for the efficient solution of microscale boundary value problems},journal={Computer Methods in Applied Mechanics and Engineering},volume={409},pages={115959},year={2023},doi={10.1016/j.cma.2023.115959}}
A level set-based procedure for the cohesive modelling of yarn-yarn contacts in woven composite RVEs
@article{LiLevelSet2023,author={Li, A. and Moustafa Kamel, K.E. and Wintiba, B. and Remmers, J.J.C. and Geers, M.G.D. and Massart, T.J.},title={A level set-based procedure for the cohesive modelling of yarn-yarn contacts in woven composite RVEs},journal={Composite Structures},volume={304},number={1},pages={116356},year={2023},doi={10.1016/j.compstruct.2022.116356}}
A thermodynamically consistent J-integral formulation for fluid-driven fracture propagation in poroelastic continua
@article{Bergkamp2023,author={Bergkamp, E. and Verhoosel, C.V. and Remmers, J.J.C. and Smeulders, D.M.J.},title={A thermodynamically consistent J-integral formulation for fluid-driven fracture propagation in poroelastic continua},journal={Journal of the Mechanics and Physics of Solids},volume={170},pages={105082},year={2023},doi={10.1016/j.jmps.2022.105082}}
@article{Kaiser2022,author={Kaiser, T. and Remmers, J.J.C. and Geers, M.G.D.},title={An adaptive wavelet-based collocation method for solving multiscale problems in continuum mechanics},journal={Computational Mechanics},year={2022},doi={10.1007/s00466-022-02207-5}}
The influence of the internal pressure on the residual strength of composite-overwrapped pressure vessels subjected to external contact loading
@article{Weerts2022,author={Weerts, R.A.J. and Cousign\'e, O. and Kunze, K. and Geers, M.G.D. and Remmers, J.J.C.},title={The influence of the internal pressure on the residual strength of composite-overwrapped pressure vessels subjected to external contact loading},journal={Composite Structures},volume={296},pages={115840},year={2022},doi={10.1016/j.compstruct.2022.115840}}
A generalised path-following solver for robust analysis of material failure
@article{Borjesson2022,author={B{\"o}rjesson, E. and Remmers, J.J.C. and Fagerstr{\"o}m, M.},title={A generalised path-following solver for robust analysis of material failure},journal={Computational Mechanics},year={2022},doi={10.1007/s00466-022-02175-w}}
A dimensionally-reduced fracture flow model for poroelastic media with fluid entry resistance and fluid slip
@article{Bergkamp2022,author={Bergkamp, E.A. and Verhoosel, C.V. and Remmers, J.J.C. and Smeulders, D.M.J.},title={A dimensionally-reduced fracture flow model for poroelastic media with fluid entry resistance and fluid slip},journal={Journal of Computational Physics},year={2022},doi={10.1016/j.jcp.2022.110972}}
A discrete element framework for the numerical analysis of particle bed-based additive manufacturing processes
@article{Dorussen2022,author={Dorussen, B.J.A. and Geers, M.G.D. and Remmers, J.J.C.},title={A discrete element framework for the numerical analysis of particle bed-based additive manufacturing processes},journal={Engineering with Computers},year={2022},doi={10.1007/s00366-021-01590-6}}
An adaptive isogeometric shell element for the prediction of initiation and growth of multiple delaminations in curved composite structures
@article{Borjesson2022Shell,author={B{\"o}rjesson, E. and Remmers, J.J.C. and Fagerstr{\"o}m, M.},title={An adaptive isogeometric shell element for the prediction of initiation and growth of multiple delaminations in curved composite structures},journal={Composites Structures},volume={260},pages={106701},year={2022},doi={10.1016/j.compstruc.2021.106701}}
Novel material model to predict the residual strength of a composite overwrapped pressure vessel after impact
@article{Weerts2022Impact,author={Weerts, R.A.J. and Cousign\'e, O. and Kunze, K. and Geers, M.G.D. and Remmers, J.J.C.},title={Novel material model to predict the residual strength of a composite overwrapped pressure vessel after impact},journal={International Journal of Impact Engineering},volume={260},pages={104055},year={2022},doi={10.1016/j.ijimpeng.2021.104055}}
2021
A methodological approach to model composite overwrapped pressure vessels under impact conditions
@article{Weerts2021,author={Weerts, R.A.J. and Cousign\'e, O. and Kunze, K. and Geers, M.G.D. and Remmers, J.J.C.},title={A methodological approach to model composite overwrapped pressure vessels under impact conditions},journal={Composite Structures},volume={276},pages={114482},year={2021},doi={10.1016/j.compstruct.2021.114482}}
Deformation and failure kinetics of Polyvinylidene fluoride (PVDF): influence of crystallinity
@article{Pini2021,author={Pini, T. and {van Drongelen}, M. and Remmers, J.J.C. and Geers, M.G.D. and Govaert, L.E.},title={Deformation and failure kinetics of Polyvinylidene fluoride (PVDF): influence of crystallinity},journal={Journal of Polymer Science},volume={59},pages={1209--1220},year={2021},doi={10.1002/pol.20210030}}
Prediction of the deformed geometry of vat photo-polymerized components using a multi-physical modeling framework
@article{Westbeek2021,author={Westbeek, S. and Remmers, J.J.C. and {van Dommelen}, J.A.W. and Maalderink, H.H. and Geers, M.G.D.},title={Prediction of the deformed geometry of vat photo-polymerized components using a multi-physical modeling framework},journal={Additive Manufacturing},volume={40},pages={101922},year={2021},doi={10.1016/j.addma.2021.101922}}
Multiphysical modeling and optimal control of material properties for photopolymerization processes
@article{Classens2021,author={Classens, K. and Hafkamp, T. and Westbeek, S. and Remmers, J.J.C. and Weiland, S.},title={Multiphysical modeling and optimal control of material properties for photopolymerization processes},journal={Additive Manufacturing},volume={38},pages={101520},year={2021},doi={10.1016/j.addma.2020.101520}}
The initiation and progression of damage in composite overwrapped pressure vessels subjected to contact loads
@article{Weerts2021Damage,author={Weerts, R.A.J. and Cousign\'e, O. and Kunze, K. and Geers, M.G.D. and Remmers, J.J.C.},title={The initiation and progression of damage in composite overwrapped pressure vessels subjected to contact loads},journal={Journal of Reinforced Plastics and Composites},year={2021},doi={10.1177/0731684421992121}}
Real-Time Nonlinear Tracking Control of Photopolymerization for Additive Manufacturing
@inproceedings{Classens2021ACC,author={Classens, K. and Hafkamp, T. and Westbeek, S. and Remmers, J.J.C. and Weiland, S.},title={Real-Time Nonlinear Tracking Control of Photopolymerization for Additive Manufacturing},booktitle={Proceedings of the American Control Conference},pages={1365--1370},year={2021},doi={10.23919/ACC50511.2021.9483091},note={ISSN: 0743-1619}}
2020
Assessment of contact-induced damage mechanisms in thick-walled composite cylinders
@article{Weerts2020,author={Weerts, R.A.J. and Cousign\'e, O. and Kunze, K. and Geers, M.G.D. and Remmers, J.J.C.},title={Assessment of contact-induced damage mechanisms in thick-walled composite cylinders},journal={Journal of Reinforced Plastics and Composites},volume={39},number={17-18},pages={679--699},year={2020},doi={10.1177/0731684420923043}}
A staggered finite element procedure for the coupled Stokes-Biot system with fluid entry resistance
@article{Bergkamp2020,author={Bergkamp, E.A. and Verhoosel, C.V. and Remmers, J.J.C. and Smeulders, D.M.J.},title={A staggered finite element procedure for the coupled Stokes-Biot system with fluid entry resistance},journal={Computational Geosciences},volume={24},pages={1497--1522},year={2020},doi={10.1007/s10596-019-09931-7}}
Multi-scale process simulation for additive manufacturing through particle filled vat photopolymerization
@article{Westbeek2020,author={Westbeek, S. and Remmers, J.J.C. and {van Dommelen}, J.A.W. and Geers, M.G.D.},title={Multi-scale process simulation for additive manufacturing through particle filled vat photopolymerization},journal={Computational Materials Science},volume={180},pages={109647},year={2020},doi={10.1016/j.commatsci.2020.109647}}
Efficient modelling of delamination growth using adaptive isogeometric continuum shell elements
@article{Adams2020,author={Adams, C. and Fagerstr{\"o}m, M. and Remmers, J.J.C.},title={Efficient modelling of delamination growth using adaptive isogeometric continuum shell elements},journal={Computational Mechanics},volume={65},number={1},pages={99--117},year={2020},doi={10.1007/s00466-019-01754-8}}
Influence of particle shape in the additive manufacturing process for ceramics
@article{Westbeek2020Ceramics,author={Westbeek, S. and {van Dommelen}, J.A.W. and Remmers, J.J.C. and Geers, M.G.D.},title={Influence of particle shape in the additive manufacturing process for ceramics},journal={Computers \& Mathematics with Applications},year={2020},doi={10.1016/j.camwa.2018.08.033}}
Multi-dimensional wavelet reduction for the homogenisation of microstructures
One of the recent fields of interest in computational homogenisation is the development of model order reduction frameworks to address the significant computational costs enabling fast and accurate evaluation of the microstructural volume element. Model order reduction techniques are applied to computationally challenging analyses of detailed micro- and or macro-structural problems to reduce both computational time and memory usage. In order to alleviate the costly integration, a wavelet-reduced order model for one-dimensional microstructural problems was presented in van Tuijl et al. (2019). This novel approach addresses both the large number of degrees of freedom and integration costs and provides control on errors in the microstructural fields. In this work, this wavelet reduced order model is extended to a multi-dimensional framework and benchmarked for more realistic multi-scale problems. The Wavelet-Reduced Order Model consists of two reduction steps. First, a Reduced Order Model is constructed to reduce the dimensionality of the microstructural model. Second, a wavelet representation is applied to reduce the integration costs of the microstructural model, whilst maintaining control over the local integration error. The multi-dimensional Wavelet-Reduced Order Model is demonstrated for a set of two-dimensional path-dependent microstructural models, evaluating their accuracy and reduction with respect to the full order models on the microstructural and homogenised fields.
@article{vanTuijl2020,title={Multi-dimensional wavelet reduction for the homogenisation of microstructures},journal={Computer Methods in Applied Mechanics and Engineering},volume={359},pages={112652},year={2020},issn={0045-7825},doi={10.1016/j.cma.2019.112652},author={{van Tuijl}, R.A. and Remmers, J.J.C. and Geers, M.G.D.},keywords={Model reduction, Wavelets, Multi-dimensionality, Numerical integration, Micro-mechanics},}
2019
Effects of intrinsic properties on fracture nucleation and propagation in swelling hydrogels
@article{Ding2019,author={Ding, J. and Remij, E.W. and Remmers, J.J.C. and Huyghe, J.M.},title={Effects of intrinsic properties on fracture nucleation and propagation in swelling hydrogels},journal={Polymers},volume={11},number={5},pages={926},year={2019},doi={10.3390/polym11050926}}
Wavelet Based Reduced Order Models for Microstructural Analyses
@article{vanTuijl2019,author={{van Tuijl}, R.A. and Harnish, C. and Matou{\v{s}}, K. and Remmers, J.J.C. and Geers, M.G.D.},title={Wavelet Based Reduced Order Models for Microstructural Analyses},journal={Computational Mechanics},volume={63},number={3},pages={535--554},year={2019},doi={10.1007/s00466-018-1608-3}}
Shear response of 3D non-woven carbon fibre reinforced composites
@article{Meza2019,author={Meza, L.R. and Schormans, J.M.J. and Remmers, J.J.C. and Deshpande, V.S.},title={Shear response of 3D non-woven carbon fibre reinforced composites},journal={Journal of the Mechanics and Physics of Solids},volume={125},pages={276--297},year={2019},doi={10.1016/j.jmps.2018.12.019}}
Gradient-enhanced damage modeling in Kirchhoff–Love shells: Application to isogeometric analysis of composite laminates
@article{Pigazzini2019,author={Pigazzini, M.S. and Kamensky, D. and {van Iersel}, D.A.P. and Remmers, J.J.C. and Bazilevs, Y.},title={Gradient-enhanced damage modeling in Kirchhoff–Love shells: Application to isogeometric analysis of composite laminates},journal={Computer Methods in Applied Mechanics and Engineering},volume={46},pages={152--179},year={2019},doi={10.1016/j.cma.2018.10.042}}
A numerical study on the effect of anisotropy on hydraulic fractures
V. Valliappan, J.J.C. Remmers, A. Barnhoorn, and D.M.J. Smeulders
@article{Valliappan2019,author={Valliappan, V. and Remmers, J.J.C. and Barnhoorn, A. and Smeulders, D.M.J.},title={A numerical study on the effect of anisotropy on hydraulic fractures},journal={Rock Mechanics and Rock Engineering},volume={52},number={2},pages={591--609},year={2019},doi={10.1007/s00603-017-1362-4}}
2018
Integration Efficiency for Model Reduction in Micro-Mechanical Analyses
@article{vanTuijl2018,author={{van Tuijl}, R.A. and Remmers, J.J.C. and Geers, M.G.D.},title={Integration Efficiency for Model Reduction in Micro-Mechanical Analyses},journal={Computational Mechanics},volume={62},number={2},pages={151--169},year={2018},doi={10.1007/s00466-017-1490-4}}
Multiphysical modeling of the photopolymerization process for additive manufacturing of ceramics
@article{Westbeek2018,author={Westbeek, S. and {van Dommelen}, J.A.W. and Remmers, J.J.C. and Geers, M.G.D.},title={Multiphysical modeling of the photopolymerization process for additive manufacturing of ceramics},journal={European Journal of Mechanics / A: Solids},volume={71},pages={210--223},year={2018},doi={10.1016/j.euromechsol.2018.03.020}}
3D Printed structural electronics: embedding and connecting electronic components into freeform electronic devices
H.H. Maalderink, F.B.J. Bruning, M.R. Schipper, J.J. van der Werff, W.C. Germs, J.J.C. Remmers, and E.R. Meinders
Plastics, Rubber and Composites, Macromolecular Engineering, Mar 2018
@article{Maalderink2018,author={Maalderink, H.H. and Bruning, F.B.J. and de Schipper, M.R. and {van der Werff}, J.J. and Germs, W.C. and Remmers, J.J.C. and Meinders, E.R.},title={3D Printed structural electronics: embedding and connecting electronic components into freeform electronic devices},journal={Plastics, Rubber and Composites, Macromolecular Engineering},volume={47},pages={35--41},year={2018},doi={10.1080/14658011.2017.1418165}}
Swelling driven crack propagation in large deformation in hydrogel
@article{Ding2018,author={Ding, J.Q. and Remmers, J.J.C. and Leszczynski, S. and Huyghe, J.M.},title={Swelling driven crack propagation in large deformation in hydrogel},journal={Journal of the Mechanics and Physics of Solids},volume={85},number={2},pages={021007},year={2018},doi={10.1115/1.4038698}}
On the numerical simulation of crack interaction in hydraulic fracturing
@article{Remij2018,author={Remij, E.M. and Remmers, J.J.C. and Huyghe, J.M. and Smeulders, D.M.J.},title={On the numerical simulation of crack interaction in hydraulic fracturing},journal={Computational Geosciences},volume={22},number={1},pages={423--437},year={2018},doi={10.1007/s10596-017-9702-8}}
2017
Hydraulic Fracturing in Anisotropic and Heterogeneous Rocks
V. Valliappan, J.J.C. Remmers, A. Barnhoorn, and D.M.J. Smeulders
In Poromechanics 2017 - Proceedings of the 6th Biot Conference on Poromechanics, Mar 2017
@inproceedings{Valliappan2017,author={Valliappan, V. and Remmers, J.J.C. and Barnhoorn, A. and Smeulders, D.M.J.},title={Hydraulic Fracturing in Anisotropic and Heterogeneous Rocks},journal={Rock Mechanics and Rock Engineering},booktitle={Poromechanics 2017 - Proceedings of the 6th Biot Conference on Poromechanics},publisher={American Society of Civil Engineers (ASCE)},pages={2035--2040},doi={10.1061/9780784480779.252},year={2017}}
Finite versus small strain discrete dislocation analysis of cantilever bending of single crystals
@article{Irani2017,author={Irani, N. and Remmers, J.J.C. and Deshpande, V.S.},title={Finite versus small strain discrete dislocation analysis of cantilever bending of single crystals},journal={Acta Mechanica Sinica},year={2017},doi={10.1007/s10409-017-0682-7}}
@article{Hallett2017,author={Hallett, S.R. and Remmers, J.J.C.},title={Composites2015},journal={Composites Part A: Applied Science and Manufacturing},volume={92},pages={145--145},year={2017},doi={10.1016/j.compositesa.2016.11.003}}
A Discrete Dislocation Analysis of Hydrogen-Assisted Mode-I Fracture
@article{Irani2017Hydrogen,author={Irani, N. and Remmers, J.J.C. and Deshpande, V.S.},title={A Discrete Dislocation Analysis of Hydrogen-Assisted Mode-I Fracture},journal={Mechanics of Materials},volume={105},pages={67--79},year={2017},doi={10.1016/j.mechmat.2016.11.008}}
Interaction between crack tip advancement speed and fluid velocity in fracturing saturated porous media
T.D. Cao, E. Milanese, E.W. Remij, P. Rizzato, J.J.C. Remmers, L. Simoni, J.M. Huyghe, F. Hussain, and B.A. Schrefler
@article{Cao2017,author={Cao, T.D. and Milanese, E. and Remij, E.W. and Rizzato, P. and Remmers, J.J.C. and Simoni, L. and Huyghe, J.M. and Hussain, F. and Schrefler, B.A.},title={Interaction between crack tip advancement speed and fluid velocity in fracturing saturated porous media},journal={Mechanics Research Communications},volume={80},pages={24--37},year={2017},doi={10.1016/j.mechrescom.2016.09.011}}
2016
An investigation of the step-wise propagation of a mode-II fracture in a poroelastic medium
@article{Remij2016,author={Remij, E.M. and Remmers, J.J.C. and Huyghe, J.M. and Smeulders, D.M.J.},title={An investigation of the step-wise propagation of a mode-II fracture in a poroelastic medium},journal={Mechanics Research Communications},volume={10},pages={10--15},year={2016},doi={10.1016/j.mechrescom.2016.03.001}}
2015
Finite strain discrete dislocation plasticity in a total Lagrangian setting
@article{Irani2015,author={Irani, N. and Remmers, J.J.C. and Deshpande, V.S.},title={Finite strain discrete dislocation plasticity in a total Lagrangian setting},journal={Journal of the Mechanics and Physics of Solids},volume={83},pages={160--178},year={2015},doi={10.1016/j.jmps.2015.06.013}}
Propagation of delamination in composite materials with isogeometric continuum shell elements
@article{Hosseini2015,author={Hosseini, S. and Remmers, J.J.C. and Verhoosel, C.V. and {de Borst}, R.},title={Propagation of delamination in composite materials with isogeometric continuum shell elements},journal={International Journal for Numerical Methods in Engineering},volume={102},number={3-4},pages={159--179},year={2015},doi={10.1002/nme.4730}}
The enhanced local pressure model for the accurate analysis of fluid pressure driven fracture in porous materials
@article{Remij2015,author={Remij, E.W. and Remmers, J.J.C. and Huyghe, J.M. and Smeulders, D.M.J.},title={The enhanced local pressure model for the accurate analysis of fluid pressure driven fracture in porous materials},journal={Computer Methods in Applied Mechanics and Engineering},volume={286},pages={293--312},year={2015},doi={10.1016/j.cma.2014.12.025}}
2014
Partition of unity based model for crack nucleation and propagation
@article{Remij2014,author={Remij, E.W. and Remmers, J.J.C. and Pizzocolo, F. and Smeulders, D.M.J. and Huyghe, J.M.},title={Partition of unity based model for crack nucleation and propagation},journal={Transport in Porous Media},volume={106},pages={505--522},year={2014},doi={10.1007/s11242-014-0399-z}}
@article{deBorst2014,author={{de Borst}, R. and Remmers, J.J.C. and Verhoosel, C.V.},title={Evolving Discontinuities and Cohesive Fracture},journal={Procedia IUTAM},volume={10},pages={125--137},year={2014},doi={10.1016/j.piutam.2014.01.014}}
The incorporation of gradient damage models in shell elements
@article{Hosseini2014,author={Hosseini, S. and Remmers, J.J.C. and {de Borst}, R.},title={The incorporation of gradient damage models in shell elements},journal={International Journal for Numerical Methods in Engineering},volume={98},number={6},pages={391--398},year={2014},doi={10.1002/nme.4640}}
An isogeometric analysis Bézier interface element for mechanical and poromechanical fracture problems
@article{Hosseini2014b,author={Hosseini, S. and Remmers, J.J.C. and Verhoosel, C.V. and {de Borst}, R.},title={An isogeometric continuum shell element for non-linear analysis},journal={Computer Methods in Applied Mechanics and Engineering},volume={271},pages={1--22},year={2014},doi={10.1016/j.cma.2013.11.023}}
Nichtlineare Finite-Elemente-Analyse von Festkörpern und Strukturen
@book{deBorst2015,author={{de Borst}, R. and Crisfield, M.A. and Remmers, J.J.C. and Verhoosel, C.V.},title={Nichtlineare Finite-Elemente-Analyse von Festkörpern und Strukturen},publisher={Wiley-VCH},year={2014},note={German Edition, E-book}}
2013
The Competition between Adhesive and Cohesive Fracture at a micro-Patterned Polymer-Metal Interface
O. van der Sluis, J.J.C. Remmers, M.A.C. Thurlings, B.J. Welling, and S.P.M. Noijen
@article{vanderSluis2013,author={{van der Sluis}, O. and Remmers, J.J.C. and Thurlings, M.A.C. and Welling, B.J. and Noijen, S.P.M.},title={The Competition between Adhesive and Cohesive Fracture at a micro-Patterned Polymer-Metal Interface},journal={Key Engineering Materials},volume={577-578},pages={225--228},year={2013},doi={10.4028/www.scientific.net/KEM.577-578.225}}
Isogeometric finite element analysis of poroelasticity
@article{Hosseini2013,author={Hosseini, S. and Remmers, J.J.C. and Verhoosel, C.V. and {de Borst}, R.},title={An isogeometric solid-like shell element for non-linear analysis},journal={International Journal for Numerical Methods in Engineering},volume={95},number={3},pages={238--256},year={2013},doi={10.1002/nme.4505}}
The cohesive band model: a cohesive surface formulation with stress triaxiality
@article{Remmers2013,author={Remmers, J.J.C. and {de Borst}, R. and Verhoosel, C.V. and Needleman, A.},title={The cohesive band model: a cohesive surface formulation with stress triaxiality},journal={International Journal of Fracture},volume={181},number={2},pages={177--188},year={2013},doi={10.1007/s10704-013-9834-3}}
A large deformation formulation for fluid flow in a progressively fracturing porous material
@article{Irzal2013b,author={Irzal, F. and Remmers, J.J.C. and Huyghe, J.M. and {de Borst}, R.},title={A large deformation formulation for fluid flow in a progressively fracturing porous material},journal={Computer Methods in Applied Mechanics and Engineering},volume={256},pages={29--37},year={2013},doi={10.1016/j.cma.2012.12.011}}
Two-Dimensional Mode I Crack Propagation in Saturated Ionized Porous Media Using Partition of Unity Finite Elements
@article{Kraaijeveld2013,author={Kraaijeveld, F. and Huyghe, J.M. and Remmers, J.J.C. and {de Borst}, R.},title={Two-Dimensional Mode I Crack Propagation in Saturated Ionized Porous Media Using Partition of Unity Finite Elements},journal={Journal of Applied Mechanics},volume={80},number={2},pages={020907},year={2013},doi={10.1115/1.4007904}}
2012
Non-linear Finite Element Analysis of Solids and Structures
@book{deBorst2012,author={{de Borst}, R. and Crisfield, M.A. and Remmers, J.J.C. and Verhoosel, C.V.},title={Non-linear Finite Element Analysis of Solids and Structures},edition={2nd},series={Wiley Series in Computational Mechanics},publisher={Wiley},year={2012},doi={10.1002/9781118375938},isbn={978-0-470-66644-9}}
2010
Computational homogenisation for adhesive and cohesive failure in quasi-brittle solids
@article{Verhoosel2010,author={Verhoosel, C.V. and Remmers, J.J.C. and Guti{\'e}rrez, M.A. and {de Borst}, R.},title={Computational homogenisation for adhesive and cohesive failure in quasi-brittle solids},journal={International Journal for Numerical Methods in Engineering},volume={83},number={8-9},pages={1155--1179},year={2010},doi={10.1002/nme.2854}}
A partition of unity-based multiscale approach for modeling fracture in piezoelectric ceramics
@article{Verhoosel2010b,author={Verhoosel, C.V. and Remmers, J.J.C. and Guti{\'e}rrez, M.A.},title={A partition of unity-based multiscale approach for modeling fracture in piezoelectric ceramics},journal={International Journal for Numerical Methods in Engineering},volume={82},number={8},pages={966--994},year={2010},doi={10.1002/nme.2792}}
Model for the scaling of stresses and fluctuations in flows near jamming
@article{Tighe2010,author={Tighe, B.P. and Woldhuis, E. and Remmers, J.J.C. and {van Saarloos}, W. and {van Hecke}, M.},title={Model for the scaling of stresses and fluctuations in flows near jamming},journal={Physical Review Letters},volume={105},pages={088303},year={2010},doi={10.1103/PhysRevLett.105.088303}}
2009
A dissipation-based arc-length method for robust simulation of brittle and ductile failure
@article{Verhoosel2009,author={Verhoosel, C.V. and Remmers, J.J.C. and Guti{\'e}rrez, M.A.},title={A dissipation-based arc-length method for robust simulation of brittle and ductile failure},journal={International Journal for Numerical Methods in Engineering},volume={77},number={9},pages={1290--1321},year={2009},doi={10.1002/nme.2447}}
Analysis of fracture and delamination in laminates using 3D numerical modelling
M.V. Cid Alfaro, A.S.J. Suiker, R. de Borst, and J.J.C. Remmers
@article{CidAlfaro2009,author={Cid Alfaro, M.V. and Suiker, A.S.J. and {de Borst}, R. and Remmers, J.J.C.},title={Analysis of fracture and delamination in laminates using 3D numerical modelling},journal={Engineering Fracture Mechanics},volume={76},pages={761--780},year={2009},doi={10.1016/j.engfracmech.2008.09.002}}
2008
Discrete dislocation-transformation model for austenitic single crystals
@article{Shi2008,author={Shi, J. and Turteltaub, S. and {van der Giessen}, E. and Remmers, J.J.C.},title={Discrete dislocation-transformation model for austenitic single crystals},journal={Modelling and Simulation in Materials Science and Engineering},volume={16},number={5},pages={055005},year={2008},doi={10.1088/0965-0393/16/5/055005}}
Influence of Porosity on the Interlaminar Shear Strength of Fibre-Metal Laminates
@article{Lopes2008,author={Lopes, C.S. and Remmers, J.J.C. and Gurdal, Z.},title={Influence of Porosity on the Interlaminar Shear Strength of Fibre-Metal Laminates},journal={Key Engineering Materials},volume={383},pages={35--52},year={2008},doi={10.4028/www.scientific.net/KEM.383.35}}
The simulation of dynamic crack propagation using the cohesive segments method
@article{Remmers2008,author={Remmers, J.J.C. and {de Borst}, R. and Needleman, A.},title={The simulation of dynamic crack propagation using the cohesive segments method},journal={Journal of the Mechanics and Physics of Solids},volume={56},number={1},pages={70--92},year={2008},doi={10.1016/j.jmps.2007.08.003}}
This contribution starts with a discussion of various phenomena in laminated composite structures that can lead to failure: matrix cracking, delamination between plies, and debonding and subsequent pull-out between fibres and the matrix material. The different scales are discussed at which the effect of these nonlinearities can be analysed. From these scales – the macro, meso and micro-levels – the meso-level is normally used for the analysis of delamination, which is the focus of this contribution. At this level, the plies are modelled as continua and interface elements between them conventionally serve as the framework to model delamination and debonding. After a a derivation of interface elements and a brief discussion of the cohesive–zone concept and its importance for the analysis of delamination, a particular finite element model for the plies is elaborated: the solid–like shell. Next, a more recent method to numerically model delamination is discussed, which exploits the partition–of–unity property of finite element shape functions. This approach offers advantages over interface elements, as will be discussed in detail.
@inproceedings{deBorstRemmers2008,author={de Borst, R. and Remmers, J.J.C.},title={Computational Methods for Debonding in Composites},booktitle={Mechanical Response of Composites},year={2008},publisher={Springer Netherlands},address={Dordrecht},pages={1--25},doi={10.1007/978-1-4020-8584-0_1},isbn={978-1-4020-8584-0}}
Mechanical Response of Composites
Mar 2008
Contains selected papers from the ECCOMAS Thematic Conference
@book{Camanho2008,editor={Camanho, P.P. and Dávila, C.G. and Pinho, S.T. and Remmers, J.J.C.},title={Mechanical Response of Composites},series={Computational Methods in Applied Sciences},publisher={Springer Dordrecht},year={2008},doi={10.1007/978-1-4020-8584-0},isbn={978-1-4020-8584-0},note={Contains selected papers from the ECCOMAS Thematic Conference}}
@article{deBorst2006,author={{de Borst}, R. and Remmers, J.J.C.},title={Computational modeling of delamination},journal={Composite Science and Technology},volume={66},number={6},pages={713--722},year={2006},doi={10.1016/j.compscitech.2004.12.025}}
Mesh-independent discrete numerical representations of cohesive-zone models
@article{deBorst2006b,author={{de Borst}, R. and Remmers, J.J.C. and Needleman, A.},title={Mesh-independent discrete numerical representations of cohesive-zone models},journal={Engineering Fracture Mechanics},volume={73},number={2},pages={160--177},year={2006},doi={10.1016/j.engfracmech.2005.05.007}}
Discontinuities in Materials and Structures – A Unifying Computational Approach
J.J.C. Remmers
Mar 2006
Supervisors: René de Borst (promotor) & Alan Needleman (promotor, Brown University)
@phdthesis{Remmers2006PhD,author={Remmers, J.J.C.},title={Discontinuities in Materials and Structures -- A Unifying Computational Approach},school={Delft University of Technology},year={2006},type={PhD Dissertation},address={Delft, The Netherlands},supervisor={Ren{\'e} de Borst and Alan Needleman},note={Supervisors: Ren{\'e} de Borst (promotor) \& Alan Needleman (promotor, Brown University)},isbn={978-90-9021094-0},}
2004
Discrete vs smeared crack models for concrete fracture: Bridging the gap
@article{deBorst2004,author={{de Borst}, R. and Remmers, J.J.C. and Needleman, A. and Abellan, M.A.},title={Discrete vs smeared crack models for concrete fracture: Bridging the gap},journal={International Journal for Numerical and Analytical Methods in Geomechanics},volume={28},number={7-8},pages={583--607},year={2004},doi={10.1002/nag.374}}
Cohesive-zone models, higher order continuum theories and reliability for computational failure analysis
@article{deBorst2004b,author={{de Borst}, R. and Guti{\'e}rrez, M.A. and Wells, G.N. and Remmers, J.J.C. and Askes, H.},title={Cohesive-zone models, higher order continuum theories and reliability for computational failure analysis},journal={International Journal for Numerical Methods in Engineering},volume={60},number={1},pages={289--315},year={2004},doi={10.1002/nme.963}}
2003
A discontinuous solid-like shell element allowing for arbitrary delaminations
@article{Remmers2003,author={Remmers, J.J.C. and Wells, G.N. and {de Borst}, R.},title={A discontinuous solid-like shell element allowing for arbitrary delaminations},journal={International Journal for Numerical Methods in Engineering},volume={58},number={13},pages={2013--2040},year={2003},doi={10.1002/nme.907}}
A cohesive segments method for the simulation of crack growth
@article{Remmers2003b,author={Remmers, J.J.C. and {de Borst}, R. and Needleman, A.},title={A cohesive segments method for the simulation of crack growth},journal={Computational Mechanics},volume={31},number={1-2},pages={69--77},year={2003},doi={10.1007/s00466-002-0394-z}}
@article{Remmers2001,author={Remmers, J.J.C. and {de Borst}, R.},title={Delamination buckling of Fibre-Metal Laminates},journal={Composite Science and Technology},volume={61},number={15},pages={2207--2213},year={2001},doi={10.1016/S0266-3538(01)00114-2}}
@mastersthesis{Remmers1998MSc,author={Remmers, Joris J.C.},title={Mode-jumping in B2000},school={Delft University of Technology, Department of Aerospace Engineering},year={1998},type={MSc Thesis},address={Delft, The Netherlands},supervisor={Eduard Riks},}
Nichtlineare Finite-Elemente-Analyse von Festkörpern und StrukturenMar 2014German Edition, E-book
