2005-2005 :: 2005-2010 :: 2010-2015 :: 2015-2020 :: 2020-now
Accepted
B.J.A. Dorussen, M.G.D. Geers & J.J.C. Remmers, An efficient ray tracing methodology for the numerical analysis of powder bed additive manufacturing processes. Accepted for publication in Additive Manufacturing.
2023
E. Börjesson, F. Larsson, K. Runesson, J.J.C. Remmers & M. Fagerström (2023) Variationally consistent homogenisation of plates, Computer Methods in Applied Mechanics and Engineering 413, 116094, 10.1016/j.cma.2023.116094
T. Lenders, J.J.C. Remmers, T. Pini, P. Veenstra, L.E. Govaert & M.G.D. Geers (2023) An elasto-viscoplastic constitutive model for the rate-dependent behavior of polyvinylidene fluoride, Journal of Polymer Science, 10.1002/pol.20220729
H. Shi, D. Giuntini, J.A.W. van Dommelen, M.G.D. Geers & J.J.C. Remmers (2023) Efficient modelling of ceramic sintering processes: Application to bilayers and membranes, Journal of the European Ceramic Society, 10.1016/j.jeurceramsoc.2023.03.053
T. Kaiser, T. Raasch, J.J.C. Remmers & M.G.D. Geers (2023) A wavelet-enhanced adaptive hierarchical FFT-based approach for the efficient solution of microscale boundary value problems Computer Methods in Applied Mechanics and Engineering 409, 115959, 10.1016/j.cma.2023.115959
A. Li, K.E. Moustafa Kamel, B. Wintiba, J.J.C. Remmers, M.G.D. Geers & T.J. Massart (2023) A level set-based procedure for the cohesive modelling of yarn-yarn contacts in woven composite RVEs. Composite Structures 304 (1), 116356, 10.1016/j.compstruct.2022.116356
E. Bergkamp, C.V. Verhoosel, J.J.C. Remmers & D.M.J. Smeulders (2023) A thermodynamically consistent J-integral formulation for fluid-driven fracture propagation in poroelastic continua. Journal of the Mechanics and Physics of Solids 170, 105082, 10.1016/j.jmps.2022.105082
2022
T. Kaiser, J.J.C. Remmers & M.G.D. Geers (2022) An adaptive wavelet-based collocation method for solving multiscale problems in continuum mechanics. Computational Mechanics. 10.1007/s00466-022-02207-5
R.A.J. Weerts, O. Cousigné, K. Kunze, M.G.D. Geers & J.J.C. Remmers (2022) The influence of the internal pressure on the residual strength of composite-overwrapped pressure vessels subjected to external contact loading. Composite Structures 296, 115840. 10.1016/j.compstruct.2022.115840
E. Börjesson, J.J.C. Remmers & M. Fagerström (2022) A generalised path-following solver for robust analysis of material failure. Computational Mechanics. 10.1007/s00466-022-02175-w
E.A. Bergkamp, C.V. Verhoosel, J.J.C. Remmers & D. Smeulders (2022) A dimensionally-reduced fracture flow model for poroelastic media with fluid entry resistance and fluid slip. Journal of Computational Physics. 10.1016/j.jcp.2022.110972
B.J.A. Dorussen, M.G.D. Geers & J.J.C. Remmers (2022) A discrete element framework for the numerical analysis of particle bed‑based additive manufacturing processes Engineering with Computers 10.1007/s00366-021-01590-6.
E. Börjesson, J.J.C. Remmers & M. Fagerström (2022) An adaptive isogeometric shell element for the prediction of initiation and growth of multiple delaminations in curved composite structures. Composites Structures 260, 106701. 10.1016/j.compstruc.2021.106701
R.A.J. Weerts, O. Cousigné, K. Kunze, M.G.D. Geers & J.J.C. Remmers (2022) Novel material model to predict the residual strength of a composite overwrapped pressure vessel after impact. International Journal of Impact Engineering 260, 104055, 10.1016/j.ijimpeng.2021.104055
2021
R.A.J. Weerts, O. Cousigné, K. Kunze, M.G.D. Geers & J.J.C. Remmers (2021) A methodological approach to model composite overwrapped pressure vessels under impact conditions. Composite Structures 276, 114482, j.compstruct.2021.114482
T. Pini, M. van Drongelen, J.J.C. Remmers, M. G. D. Geers & L. E. Govaert (2021) Deformation and failure kinetics of Polyvinylidene fluoride (PVDF): influence of crystallinity. Journal of Polymer Science 59, 1209–1220, 10.1002/pol.20210030
S. Westbeek, J.J.C. Remmers, J.A.W. van Dommelen, H.H. Maalderink & M.G.D. Geers (2021) Prediction of the deformed geometry of vat photo-polymerized components using a multi-physical modeling framework Additive Manufacturing 40, 101922 10.1016/j.addma.2021.101922.
K. Classens, T. Hafkamp, S. Westbeek, J.J.C. Remmers & S. Weiland (2021) Multiphysical modeling and optimal control of material properties for photopolymerization processes Additive Manufacturing 38, 101520 10.1016/j.addma.2020.101520.
R.A.J. Weerts, O. Cousigné, K. Kunze, M.G.D. Geers & J.J.C. Remmers (2021) The initiation and progression of damage in composite overwrapped pressure vessels subjected to contact loads Journal of Reinforced Plastics and Composites, 10.1177/0731684421992121.
K. Classens, T. Hafkamp, S. Westbeek, J.J.C. Remmers & S. Weiland (2021) Real-Time Nonlinear Tracking Control of Photopolymerization for Additive Manufacturing. In Proceedings of the American Control Conference, 1365-1370 ISSN: 0743-1619
2020
R.A.J. Weerts, O. Cousigné, K. Kunze, M.G.D. Geers & J.J.C. Remmers (2020) Assessment of contact-induced damage mechanisms in thick-walled composite cylinders Journal of Reinforced Plastics and Composites 39 (17-18), 679-699 10.1177/0731684420923043
E.A. Bergkamp, C.V. Verhoosel, J.J.C. Remmers & D.M.J. Smeulders (2020) A staggered finite element procedure for the coupled Stokes-Biot system with fluid entry resistance Computational Geosciences 24, 1497-1522 10.1007/s10596-019-09931-7.
S. Westbeek, J.J.C. Remmers, J.A.W. Van Dommelen & M.G.D. Geers (2020) Multi-scale process simulation for additive manufacturing through particle filled vat photopolymerization Computational Materials Science 180, 109647 10.1016/j.commatsci.2020.109647
C. Adams, M. Fagerström & J.J.C. Remmers (2020) Efficient modelling of delamination growth using adaptive isogeometric continuum shell elements
Computational Mechanics 65 (1): 99-117 10.1007/s00466-019-01754-8.
S.Westbeek, J.A.W. van Dommelen, J.J.C.Remmers & M.G.D.Geers (2020) Influence of particle shape in the additive manufacturing process for ceramics Computers & Mathematics with Applications 10.1016/j.camwa.2018.08.033
2019
J. Ding, E.W. Remij, J.J.C. Remmers & J.M. Huyghe (2019) Effects of intrinsic properties on fracture nucleation and propagation in swelling hydrogels Polymers 11(5), 926 10.3390/polym11050926.
R.A. van Tuijl, C. Harnish, K. Matouš, J.J.C. Remmers & M.G.D. Geers (2019) Wavelet Based Reduced Order Models for Microstructural Analyses Computational Mechanics 63(3), 535-554 10.1007/s00466-018-1608-3.
L.R. Meza, J.M.J. Schormans, J.J.C. Remmers & V.S. Deshpande (2019) Shear response of 3D non-woven carbon fibre reinforced composites Journal of the Mechanics and Physics of Solids 125, 276–297 10.1016/j.jmps.2018.12.019.
M.S. Pigazzini, D. Kamensky, D.A.P. van Iersel, J.J.C. Remmers & Y. Bazilevs (2019) Gradient-enhanced damage modeling in Kirchhoff–Love shells: Application to isogeometric analysis of composite laminates. Computer Methods in Applied Mechanics and Engineering 46 152-179 10.1016/j.cma.2018.10.042.
V. Valliappan, J.J.C. Remmers, A. Barnhoorn & D.J.M. Smeulders (2019) A numerical study on the effect of anisotropy on hydraulic fractures Rock Mechanics and Rock Engineering 52 (2) 591-609 10.1007/s00603-017-1362-4.
2018
R.A. van Tuijl, J.J.C. Remmers & M.G.D. Geers (2018) Integration Efficiency for Model Reduction in Micro-Mechanical Analyses Computational Mechanics 62 (2), 151-169 10.1007/s00466-017-1490-4.
S. Westbeek, J.A.W. van Dommelen, J.J.C. Remmers & M.G.D Geers (2018) Multiphysical modeling of the photopolymerization process for additive manufacturing of ceramics European Journal of Mechanics / A Solids 71 210-223 10.1016/j.euromechsol.2018.03.020.
H.H. Maalderink, F.B.J. Bruning, M.R. de Schipper, J.J. van der Werff, W.C. Germs, J.J.C. Remmers & E.R. Meinders (2018) 3D Printed structural electornics: embedding and connecting electronic components into freefrom electronic devices. Plastics, Rubber and Composites, Macromolecular Engineering 47, 35-41 10.1080/14658011.2017.1418165.
J.Q. Ding, J.J.C. Remmers, S. Leszczynski & J.M. Huyghe (2018) Swelling driven crack propagation in large deformation in hydrogel Journal of the Mechanics and Physics of Solids 85 (2), 021007 10.1115/1.4038698.
E.M. Remij, J.J.C. Remmers, J.M. Huyghe & D.J.M. Smeulders (2018) On the numerical simulation of crack interaction in hydraulic fracturing Computational Geosciences 22(1), 423-437 10.1007/s10596-017-9702-8.
2017
N. Irani, J.J.C. Remmers & V.S. Deshpande (2017) Finite versus small strain discrete dislocation analysis of cantilever bending of single crystals Acta Mechanica Sinica. 10.1007/s10409-017-0682-7.
S.R. Hallett & J.J.C. Remmers (2017) Composites2015. Composites Part A-Applied Science and Manufacturing 92: 145-145 10.1016/j.compositesa.2016.11.003.
N. Irani, J.J.C. Remmers & V.S. Deshpande (2017) A Discrete Dislocation Analysis of Hydrogen-Assisted Mode-I Fracture. Mechanics of Materials 105: 67-79 10.1016/j.mechmat.2016.11.008.
T.D. Cao, E. Milanese, E.W. Remij, P. Rizzato, J.J.C. Remmers, L. Simoni, J.M. Huyghe, F. Hussain & B.A. Schrefler (2017) Interaction between crack tip advancement speed and fluid velocity in fracturing saturated porous media. Mechanics Research Communications 80: 24-37 10.1016/j.mechrescom.2016.09.011.
E.M. Remij, J.J.C. Remmers, J.M. Huyghe & D.J.M. Smeulders (2016) An investigation of the step-wise propagation of a mode-II fracture in a poroelastic medium. Mechanics Research Communications 10: 10-15 10.1016/j.mechrescom.2016.03.001.
2015
N. Irani, J.J.C. Remmers & V.S. Deshpande (2015) Finite strain discrete dislocation plasticity in a total Lagrangian setting. Journal of the Mechanics and Physics of Solids 83: 160-178 10.1016/j.jmps.2015.06.013.
S. Hosseini, J.J.C. Remmers, C.V. Verhoosel & R. de Borst (2015) Propagation of delamination in composite materials with isogeometric continuum shell elements. International Journal for Numerical Methods in Engineering. 102 (3-4): 159-179 10.1002/nme.4730.
E.W. Remij, J.J.C. Remmers, J.M. Huyghe & D.J.M. Smeulders (2015) The enhanced local pressure model for the accurate analysis of fluid pressure driven fracture in porous materials. Computer Methods in Applied Mechanics and Engineering 286: 293-312 10.1016/j.cma.2014.12.025.
2014
E.W. Remij, J.J.C. Remmers, F. Pizzocolo, D.J.M. Smeulders & J.M. Huyghe (2014) Partition of unity based model for crack nucleation and propagation. Transport in Porous Media. 106: 505-522 10.1007/s11242-014-0399-z.
R. de Borst, J.J.C. Remmers & C.V. Verhoosel (2014) Evolving Discontinuities and Cohesive Fracture. Procedia IUTAM 10: 125-137 10.1016/j.piutam.2014.01.014.
S. Hosseini, J.J.C. Remmers & R. de Borst (2014) The incorporation of gradient damage models in shell elements. International Journal for Numerical Methods in Engineering 98 (6): 391-398 10.1002/nme.4640.
F. Irzal, J.J.C. Remmers, C.V. Verhoosel & R. de Borst (2014) An isogeometric analysis Bézier interface element for mechanical and poromechanical fracture problems International Journal for Numerical Methods in Engineering 97: 608-628 10.1002/nme.4615.
S. Hosseini, J.J.C. Remmers, C.V. Verhoosel & R. de Borst (2014) An isogeometric continuum shell element for non-linear analysis. Computer Methods in Applied Mechanics and Engineering 271: 1-22 10.1016/j.cma.2013.11.023.
2013
O. van der Sluis, J.J.C. Remmers, M.A.C. Thurlings, B.J. Welling & S.P.M. Noijen (2013) The Competition between Adhesive and Cohesive Fracture at a micro-Patterned Polymer-Metal Interface. Key Engineering Materials 577-578: 225-228 10.4028/www.scientific.net/KEM.577-578.225.
F. Irzal, J.J.C. Remmers, C.V. Verhoosel & R. de Borst (2013) Isogeometric finite element analysis of poroelasticity. International Journal for Numerical and Analytical Methods in Geomechanics 37 (12): 1891-1907 10.1002/nag.2195.
S. Hosseini, J.J.C. Remmers, C.V. Verhoosel & R. de Borst (2013) An isogeometric solid-like shell element for non-linear analysis. International Journal for Numerical Methods in Engineering 95 (3): 238-256 10.1002/nme.4505.
J.J.C. Remmers, R. de Borst, C.V. Verhoosel & A. Needleman (2013) The cohesive band model: a cohesive surface formulation with stress triaxiality. International Journal of Fracture 181 (2): 177-188 10.1007/s10704-013-9834-3.
F. Irzal, J.J.C. Remmers, J.M. Huyghe & R. de Borst (2013) A large deformation formulation for fluid flow in a progressively fracturing porous material. Computer Methods in Applied Mechanics and Engineering 256: 29-37 0.1016/j.cma.2012.12.011.
F. Kraaijeveld, J.M. Huyghe, J.J.C. Remmers & R. de Borst (2013) Two-Dimensional Mode I Crack Propagation in Saturated Ionized Porous Media Using Partition of Unity Finite Elements. Journal of Applied Mechanics. 80 (2): 020907 10.1115/1.4007904.
2010
C.V. Verhoosel, J.J.C. Remmers, M.A. Gutiérrez & R. de Borst (2010) Computational homogenisation for adhesive and cohesive failure in quasi-brittle solids International Journal for Numerical Methods in Engineering 83 (8-9): 1155-1179 10.1002/nme.2854.
C.V. Verhoosel, J.J.C. Remmers & M.A. Gutiérrez (2010) A partition of unity-based multiscale approach for modeling fracture in piezoelectric ceramics. International Journal for Numerical Methods in Engineering 82 (8): 966-994 10.1002/nme.2792.
B.P. Tighe, E. Woldhuis, J.J.C. Remmers, W. van Saarloos & M.van Hecke (2010) Model for the scaling of stresses and fluctuations in flows near jamming. Physical Review Letters 105: 088303 10.1103/PhysRevLett.105.088303.
2009
C.V. Verhoosel, J.J.C. Remmers & M.A. Gutiérrez (2009) A dissipation-based arc-length method for robust simulation of brittle and ductile failure. International Journal for Numerical Methods in Engineering 77 (9): 1290-1321 10.1002/nme.2447.
M.V. Cid Alfaro, A.S.J. Suiker, R. de Borst & J.J.C. Remmers (2009) Analysis of fracture and delamination in laminates using 3D numerical modelling. Engineering Fracture Mechanics 76: 761-780 10.1016/j.engfracmech.2008.09.002.
2008
J. Shi, S. Turteltaub, E. van der Giessen & J.J.C. Remmers (2008) Discrete dislocation-transformation model for austenitic single crystals. Modelling and Simulation in Materials Science and Engineering, 16 (5): 055005 10.1088/0965-0393/16/5/055005.
C.S. Lopes, J.J.C. Remmers & Z. Gurdal (2008) Influence of Porosity on the Interlaminar Shear Strength of Fibre-Metal Laminates. Key Engineering Materials 383: 35-52 10.4028/www.scientific.net/KEM.383.35.
J.J.C. Remmers, R. de Borst & A. Needleman (2008) The simulation of dynamic crack propagation using the cohesive segments method Journal of the Mechanics and Physics of Solids. 56 (1): 70-92 10.1016/j.jmps.2007.08.003.
2006
R. de Borst & J.J.C. Remmers (2006) Computational modeling of delamination. Composite Science and Technology 66 (6): 713-722 10.1016/j.compscitech.2004.12.025.
R. de Borst, J.J.C. Remmers & A. Needleman (2006) Mesh-independent discrete numerical representations of cohesive-zone models. Engineering Fracture Mechanics 73 (2): 160-177 10.1016/j.engfracmech.2005.05.007.
2004
R. de Borst, J.J.C. Remmers, A. Needleman & M.A. Abellan (2004) Discrete vs smeared crack models for concrete fracture: Bridging the gap. International Journal for Numerical and Analytical Methods in Geomechanics 28 (7-8): 583-607 10.1002/nag.374.
R. de Borst, M.A. Gutiérrez, G.N. Wells, J.J.C. Remmers & H. Askes (2004) Cohesive-zone models, higher order continuum theories and reliability for computational failure analysis International Journal for Numerical Methods in Engineering 60 (1): 289-315 10.1002/nme.963.
2003
J.J.C. Remmers, G.N. Wells & R. de Borst (2003) A discontinuous solid-like shell element allowing for arbitrary delaminations International Journal for Numerical Methods in Engineering 58 (13): 2013-2040. 10.1002/nme.907.
J.J.C. Remmers, R. de Borst & A. Needleman (2003) A cohesive segments method for the simulation of crack growth Computational Mechanics 31 (1-2): 69-77 10.1007/s00466-002-0394-z.
2001
J.J.C. Remmers & R. de Borst (2001) Delamination buckling of Fibre-Metal Laminates. Composite Science and Technology 61 (15): 2207–2213. https://doi.org/10.1016/S0266-3538(01)00114-2